|
|
| You may want to know:
How to update the bios? Please click
here.
Besides downloading the bios file, you also need the Flash
Utility to flash bios rom. (For files before Aug 2001)
- For more FAQs about BIOS relationship, click here
please.
- You won't need to update BIOS until the latest bios has improve /
fix some functions.
- You won't need to upgrade through all of the BIOS files, just upgrade
to the latest one please and it will include all previous improvments.
| Motherboard>Socket 478>IS7-M
| Bios Issue Date:2004/03/12 | BIOS ID:1.4 | |
- Fixed the "CPU is unworkable" error message for P4 Prescott 2.4G
(533MHz/ 1M L2/ 90nm) CPUs. Please follow the steps below to update the BIOS:
- Press <F1> key to continue booting when the "CPU is unworkable"
error message shows on screen.
- Boot up the system from bootable floppy disk and then update BIOS.
- BIOS compile date: 03/12/2004.
|
| Bios Issue Date:2004/02/23 | BIOS ID:1.3 | |
- Updated Prescott CPU micro code.
- BIOS compile date: 02/23/2004.
|
| Bios Issue Date:2004/02/13 | BIOS ID:1.2 | |
- Fixed a problem where the system cannot boot into Windows if
- The OS is installed in the SATA hard disk when both the SATA and PATA
hard disks are present.
- The PATA hard disk is removed after the OS installation.
- Updated BBS code. This will fix some boot sequence issues with some SCSI
cards.
- Updated CPU micro code.
- Added notification when no 80-wire cable is installed.
- Changed the default year to 2004.
- Updated Intel OSB logo.
- BIOS compile date: 02/13/2004.
|
| Bios Issue Date:2003/11/04 | BIOS ID:1.1 | |
- Updated CPU micro code.
- Added Pentium 4 Extreme Edition support.
- Fixed the problem where the CAS latency can not be set manually when the
CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
- Fixed the problem where the system fails the diagnostic test of Intel 865G
Graphics Controller Diagnostic Utility.
- Fixed the problem where the system will hang at starting PXE if the OnChip
SATA is set to enhanced mode and the LAN boot is enabled.
- Added the message of how to enter BIOS setup in the full screen logo.
- Changed the option wordings of "Boot Device" from "ZIP100"
to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120".
- Revised the wording of memory status from "DDR at Bank" to "DDR
at DIMM" in system configuration table.
- Fixed the problem where the system will reboot when the "Resume by Alarm"
is enabled and user pressed the power button to shutdown the system during
POST.
- Fixed the problem where the HDD size was detected as 136GB when 200/250/300
GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
- Updated VGA BIOS to version V3062.
- BIOS compile date: 11/04/2003
|
| Bios Issue Date:2003/06/25 | BIOS ID:10 | |
- First release.
- BIOS compile date: 6/25/2003.
|
|
|
| |