|
|
|
| You may want to know:
How to update the bios? Please click
here.
Besides downloading the bios file, you also need the Flash
Utility to flash bios rom. (For files before Aug 2001)
- For more FAQs about BIOS relationship, click here
please.
- You won't need to update BIOS until the latest bios has improve /
fix some functions.
- You won't need to upgrade through all of the BIOS files, just upgrade
to the latest one please and it will include all previous improvments.
| Motherboard>Socket 478>IS7-E
| Bios Issue Date:2003/11/04 | BIOS ID:1.7 | |
- Updated CPU micro code.
- Added Pentium 4 Extreme Edition support.
- Fixed the problem where the CAS latency can not be set manually when the
CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
- Fixed the problem where the hard disk will not be recognized if the OnChip
SATA is set to "Combined Mode" then choose "RAID".
- Fixed the problem where system will reboot when the "Resume by Alarm" is
enabled and user pressed power button to shutdown the system during POST.
- Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are connected
to SATA1 or SATA2 (ICH5 SATA channels).
- BIOS compile date: 11/04/2003
|
| Bios Issue Date:2003/08/15 |
- Updated CPU micro code (0F29H/14H).
- Added hot key wording to enter BIOS setup when full screen logo enabled.
- Changed the option wording from "OnChip SATA" to "OnChip
SATA RAID" for "Bootable Add-in Device".
- Changed the default setting of "OnBoard IR Port" to "Disabled".
- Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0)
in ICH5R RAID 0 status. (for IS7-G and IS7 only)
- Changed the option wordings of "Boot Device" from "ZIP100"
to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120".
- Enhanced the system stability when over clocks the CPU FSB over 255 MHz
with CPU:DRAM = 1:1 setting. (Over clocking is out of warranty)
- Revised the wording of memory status from "DDR at Bank" to "DDR
at DIMM" in system configuration table.
- Fixed the problem that specific CD-ROM device could not be correctly detected
when there is specific HDD connected onto the same IDE cable.
- BIOS Compile Date: 8/15/2003.
|
| Bios Issue Date:2003/07/14 | BIOS ID:15 | |
- Fixed the problem that no effect during POST if change "Delay IDE
Initial" in BIOS setup.
- Revised the wording of IEEE1394 controller in PCI device listing.
- Fixed the problem that DOS4GW.EXE causes system hang-up in DOS environment.
- Added function that automatically detects CPU operation speed after discharging
CMOS data.
- Added SATA RAID 1 function for Intel ICH5R south bridge.The IAA RAID driver should be updated to v3.5 or later to support RAID 1 in
Windows XP.
http://downloadfinder.intel.com/scripts-df/download.asp?url=/6363/eng/iaar35_enu.exe&ProductID=961
- BIOS Compile date: 7/14/2003.
|
| Bios Issue Date:2003/07/02 | BIOS ID:14 | |
- Fixes wrong system operation caused by incomplete discharging CMOS
data by CCMOS jumper.
- Shows the correct IRQ of IDE Controller in PCI Devices Listing.
- Fixes CPU Thermal Throttling behavior while under minus temperature,
and supports minus temperature reading in BIOS Setup.
- Fixes the problem that system could not automatically get into S4
mode, after enabled Power Scheme of "Power Option" under Windows
XP
- Updates CPU Microcode (CPUID=0F13h, Patch ID=05h ; CPUID=0F12h, Patch
ID=02eh)。
- Fix the problem that PCU Slot Device in "-Bootabled Add-in Device"
function can not boot up in top priority.
- BIOS Compile Date: 7/02/2003
|
| Bios Issue Date:2003/04/23 | BIOS ID:11
- First release.
- BIOS Compile Date: 4/23/2003.
|
|
|
| |
ABIT GLOBAL HOME
|
Motherboards
|
VGA Cards
|
Accessories
|
Servers Workstations
|
DigiDice
|
